Main Content

xLynx-CB is a high precision stepper and servo motor controller expansion board, powered by ARM Cortex-M3 based LPC1768 microcontroller. xLynx-CB is ideal for low power, high performance embedded applications. The board can simultaneously handle 6 servo motors, 2 Phi Robotics Lynx boards and 1 Phi Robotics Smart Lynx board. The board can handle more than 4 stepper motors using Daisy chain configuration. The board can be powered using USB or external 5V power supply. The board may also be used for any application other than motor control.

xLynx-CB is enabled with Phi Robotics Expansion Bus. It has SPI and CAN communication peripherals on the expansion bus. Phi Robotics Expansion Bus is a cross-platform stackable connector which allows user to build modular systems. Multiple expansion boards can be stacked on top of a base board to expand the system functionality. All the signals on the expansion bus are standardised to 3.3V. Base board expansion bus have 3.3.V and 5V supply lines to power expansion boards. All Phi Robotics base boards and expansion boards comply with this expansion bus design.

Phi Robotics Expansion Bus is a 10x2 pin connector having the following peripherals: UART, SPI, I2C, CAN, GPIO and external interrupts. All expansion bus peripherals are enabled on base boards, however on expansion boards only peripherals that are required are enabled.

Features

  • 20 pin expansion port for communication with Phi Robotics base boards
  • Separate CAN terminal for CAN interface
  • Compatible with SmartLynx and Lynx breakout boards
  • USB powered and programming
  • JTAG for programming and debugging
  • UART/I2C connector for serial communication
  • On-board 3.3V regulator
  • Reverse power supply protection circuit
  • On board 6 user LEDs, 1 user switch and 1 buzzer
Please Login To Review This Product
There are no project for this product.

xLynx-CB

Stepper & Servo Motor Controller
Product Code: (H-ELC-MCT-STP-1)

Availability:

in stock
₹3,480.00
Qty:
Downloads available on purchase:
File Name
xLynx-CB Firmware
xLynx-CB Protocol Specifications

Specifications

Product Info
Product Type Expansion Board
Functionality Stepper and Servo Motor Driver & Controller
Dimensions
PCB Size 95.25mm x 57.15mm
Processor Specifications
Microcontroller LPC1768
Max CPU Frequency 100MHz
On-chip Flash 512KB
On-chip RAM 64KB SRAM
Interfaces
ISP Programming Yes
JTAG Programming Yes
Phi Robotics Expansion Bus Yes
Communication Interfaces UART, SPI, CAN, I2C
Other Interfaces GPIO, ADC, PWM
On-board Peripherals LEDs, Switch, Buzzer
On-board USB to UART Converter Yes
General Specifications
Compatible Drivers Lynx, SmartLynx
Number of Driver Channels 2 Lynx, 1 SmartLynx
On-board Crystal 12MHz
Number of Servo Motor Channels 8
Power Supply
Phase Voltage 5V
Power Supply Options USB, External Power, Phi Robotics Expansion Bus
Reverse Power Protection Only for External Power